Slick Clearance Control™ (Slick CC™)

Nominally .002" - .006"

Burnishes itself to the optimum fit in your bore...then it LASTS.

Piston Skirt Coating reduces operational clearances, protects piston skirts from scuffing, retains oil, and reduces friction. Recommended when piston and bore dimensions are providing stock clearances. Reduces slap and ring flutter compared to uncoated pistons, effectively improving ring seal and reducing wear on the pistons and rings. Also protects the interface from foreign particle wear. During a short break-in cycle (5-15 min), excess coating thickness will wear away where contact stresses are highest. Where there is room, lower contact stresses allow the thickness to remain and reduce operating clearances.

Recommended for 2 strokes and 4 strokes.


  • Reduces Stock Clearance for Best Fit
  • Reduces Slap for Better Ring Seal
  • Protects Against Scuffing
  • Retains Oil Film
  • Promotes Hydrodynamic Sliding
  • Reduces Friction
  • 2 Strokes Run Quieter Crisper
  • Other Line2Line products:

  • Armor CC
  • Boost CC
  • ThermBar
  • Thin Slick
  • HTP Black
  • SlickFit CC



4866 White Lake Road
Clarkston, MI 48346
(248) 625-3052